Skip to content

Buying a used insulated tank — what should you check?

Before buying a used insulated tank, establish the condition of the cladding and insulation, and the extent to which the tank walls beneath them have been examined. To compare offers, also find out which components will remain on the tank and what work will be needed before it returns to service.

Photographs usually show mainly the outer sheet metal. They provide a useful starting point for discussing an inspection. Assessing the layers concealed beneath the cladding requires further information and, sometimes, an agreement on access to selected areas.

Tank with sheet-metal insulation cladding, visible sheet joints and a side manway
The 10 m³ stainless steel tank in offer 1089. Galvanised sheet-metal cladding covers a 12 cm layer of wool insulation.

Three layers to ask about

A typical insulated tank with sheet-metal cladding has:

  • the tank wall — the structural component in contact with the stored medium;
  • thermal insulation — the material that limits heat exchange with the surroundings;
  • outer cladding — sheet metal that protects the insulation from environmental exposure and mechanical damage.

Ask for a description of each layer. The term “stainless steel tank” may refer to the vessel itself, while the cladding is made from another material. Insulation thickness alone is also insufficient to assess suitability for a new process. You need material data and the requirements for temperature and operating conditions.

If you are still choosing an insulation system, start with the guide to types of thermal insulation used in tanks. For a particular used tank, the next step is to establish the condition of the existing system.

What should you examine on the outer cladding?

During an inspection, look at sheet joints, details around nozzles and the manway, cladding terminations and points where supports pass through it. Check visible openings, missing fasteners and damaged sheet metal. Mark any areas that need clarification on photographs.

Staining or distorted cladding warrants a closer examination of that area. Further inspection and suitable examination methods should establish the condition of the insulation and steel there. A mark on the outer sheet alone cannot establish the extent of any change underneath.

Also ask whether the cladding has previously been removed or repaired. If photographs taken during that work are available, establish their date, location on the vessel and tank identification. Photographs of another similar tank do not describe the unit you intend to buy.

Why do moisture and service history matter?

Water entering beneath the cladding can remain in contact with the metal surface. Corrosion developing under these conditions is known as CUI, short for “corrosion under insulation”. The National Insulation Association’s “Design Objectives” guide identifies rainwater, wash water and condensation among the possible sources of moisture.

Ask where the tank operated and how it was stored after removal from service. Establish whether its contents were heated or cooled, whether operation was intermittent and whether records of earlier insulation repairs are available.

Moisture also matters for limiting heat loss. In “How to prevent corrosion?”, ROCKWOOL Technical Insulation describes how the presence of water increases the thermal conductivity of wool insulation. When an area is exposed, it is therefore useful to assess the moisture content and condition of the insulation material as well.

Can you skip this check on a stainless steel tank?

Conditions beneath insulation also need to be assessed on stainless steel. The British Stainless Steel Association’s article “Corrosion barriers for thermally insulated stainless steel” describes the possibility of localised corrosion where moisture and chlorides are present. Temperature and the service environment are among the factors involved.

For a buyer, this means checking the vessel material, service history and available inspection findings. The steel grade is one of the pieces of information needed to assess an individual tank.

How can you arrange examination beneath the insulation?

Before purchase, ask which surfaces have already been examined and which remain covered. Agree with the seller whether selected areas can be exposed and how the cladding will be reinstated afterwards. The person assessing technical condition should select the examination locations and methods to suit the tank’s construction and history.

Useful records include photographs of the exposed surface, location markings, descriptions of observed changes and the scope of any examinations performed. Inaccessible areas should also be identified. HSE’s “Inspection/Non Destructive Testing” guidance highlights the importance of method limitations and examination coverage when interpreting results.

If wall thickness measurements are needed, ask for a document identifying the reading locations and the basis for assessing them. For more on interpreting these results, see the guide to used tank wall thickness measurements.

Lower edge of the tank’s sheet-metal cladding, supports and a connection with a valve
The lower part of the tank in offer 1089. Detail photographs help identify areas to ask about when agreeing an inspection.

Insulation also changes the overall dimensions

When comparing specifications, distinguish the vessel diameter from the overall diameter including insulation. For example, offer 1089 lists 2.35 m without insulation and approximately 2.60 m including insulation. The overall height is approximately 3.00 m. These figures apply to this particular offer. Confirm dimensions marked as approximate before arranging delivery.

Also check protruding nozzles, the manway and supports. Before arranging transport and the installation location, confirm the overall dimensions in the agreed configuration. If the insulation is to be removed, record which dimensions apply before that work and which apply afterwards.

What should the cost comparison include?

Ask for a quotation based on the agreed preparation scope. Depending on inspection findings, this may involve retaining the existing insulation, repairing selected areas or replacing it. Separately establish the cost of accessing the tank walls, examining their condition and reinstating the cladding.

Record who is responsible for each task and whether the work will be completed before collection. This will make clear which configuration and preparation scope each price includes when comparing two offers.

When choosing a used tank, prepare the offer number, intended medium, operating temperature and installation location. In your enquiry to Agrotex, ask for the available insulation information and whether an inspection of the selected tank can be arranged. The scope of any additional work requires separate confirmation.